Design Features
 
  • Made by hobbyist for the hobbyist
  • 1/2" model is mounted in a 5 1/2" x 3 1/4" x 2 1/2" black plastic box & uses a 4 watt motor
  • small 5 watt motor for 3/4" and 1" models are mounted in a 7"x 5"x 2 1/2" black plastic box
  • 9 foot electric cord
  • 2 viton o-rings seal around a specialty filled pipe for an extremely low coefficient of friction and giving superior lubrication!!!
  • motor is ul listed and csa certified
  • floating ball joint type linkage is used to connect motor shaft to oscillating pipe
  • oscillates 90 degrees every 60 seconds
  • 180 degree oscillating capability available on 1/2" and 3/4" models with optional "y" fitting
  • o-rings are permanently lubricated with a synthetic teflon grease
  • outer oscillating pipe is machined for standard schedule 40 fittings
  • 1/2 and 3/4" models supplied with loc-line on outlet (these are adjustable up or down approx. 30 degrees)
  • total height with fitting attached on top:
    1/2 inch model - 4 1/4 inches
    3/4 inch model - 4 3/4 inches
    1 inch model - 5 1/4 inches
  • flow rates for each model as follows:
    1/2 inch model - 550 gph
    3/4 inch model - 850 gph
    1 inch model - 1150 gph
 
E-Mail Us with questions or comments about this product

Aquarium Currents, Inc.
443 Waterford Dr.
Georgetown, SC 29440
Phone (843) 546-0431
Fax (843) 520-4313